Desktop|中文
Home About Us Products + News Center Technical Articles Messages Contact Us

Product Details

全自动Dielectric Loss Tester-扬州达瑞

Three-Phase Capacitance and Inductance Tester Factory Direct - Yangzhou Darui

Published: 2020-08-26 09:58:32

Views: 2922

Category: Capacitance/Inductance Tester

Product Description
Three-Phase Capacitance and Inductance Tester Factory Direct 

Darui Electric recommends for you:




The Three-Phase Capacitance and Inductance Tester is suitable for rapid measurement of three-phase capacitors and reactors in Y, Y0, and Delta configurations without disconnecting lines, applicable to 35kV shunt capacitors, 10kV reactive power compensation devices, 10kV bank capacitors, and DC converter station applications.

Technical Parameters


1. Capacitance range: 0.2μF to 2,000μF;

Capacity range: 5 to 20,000 kvar;

Measurement accuracy: 0.2μF to 2μF (internal CT) ±1% reading ±0.02μF;

0.2μF to 2μF (clamp meter) ±1.5% reading ±0.05μF;

2μF to 2,000μF ±1% reading ±2 digits;

2. Inductance range: 1mH to 9.99H; Measurement accuracy: ±1.5% reading ±2 digits

3. Output measurement voltage: AC 26V/500VA; 50Hz;

4. Display: LCD screen, full Chinese output, panel-mounted thermal printer

5. Dimensions/Weight: 370×370×220 mm / 16kg

6. Operating conditions:

a. Ambient temperature: 0℃ to +40℃, relative humidity: ≤90%

b. Power supply: AC 220V±10%; 50Hz;

Working Principle




In the measured capacitor branch, there is a sampling circuit that samples the voltage and current of the capacitor under test. The output terminals of the sampling circuit are respectively connected to amplifier circuits. The voltage signal output from the voltage amplifier circuit and the current signal output from the current amplifier circuit pass through a phase detector to output a phase difference signal. After the voltage signal and current signal pass through an A/D converter, they are input to the CPU for calculation to obtain the measured capacitance value. The movable current sampling unit allows direct measurement of capacitance without removing connecting wires. In addition, the gear during measurement is automatically selected, avoiding errors caused by manual operation, with good stability, good repeatability, and accurate and reliable results.



Note: The above information and technical parameters are compiled and released by Yangzhou Darui Electric Co., Ltd.
WeChat QR Code
💬
💬 Message

Hello! Have you found what you need? Contact us directly online!

Leave a Message for Consultation
Yangzhou Darui Electric Co., Ltd.
主营产品:Dielectric Loss Tester、Transformer Ratio测试仪、Loop Resistance Tester、高压None线核相仪、Insulation Resistance Tester、Partial Discharge Tester、Cable Fault Tester、DC Resistance Tester等。
☎ Phone: 18952707000(关经理)📞 Landline: 0514-88770377✉ Email: 195214804@qq.com
Verification Code
By submitting, you agree to ourTerms of ServiceandPrivacy Policy
🏠 网站Home📞 一键拨号✉ Contact Us