1. Functional Features:

1). Built-in high-configuration industrial computer, imported 15-inch true color large LCD touch screen operation, no need for any external auxiliary equipment for testing, fully automatic control, foolproof operation, fast, simple, and convenient:

2). Equipped with automatic current stabilization system, with USB, R485, R232 multiple interfaces, easily connect external U disk, printer, and other devices. Can transmit remote control terminal operation over long distances.

3). Adopts the latest power electronics technology, imported high-precision sensors, strong anti-interference capability, high output accuracy, up to 0.2 class

4). Just set the target current, no need for manual monitoring, only need to set the test voltage, current, and step size, saving tedious labor such as manual voltage regulation, manual recording, and curve drawing, reducing labor intensity and improving work efficiency. Data can also be read to the computer for viewing after work.

5). Equipped with minimum and maximum values for current and temperature, with automatic alarm function when exceeding the limit. Has reliable self-protection functions such as overcurrent, overvoltage, overheat, and short circuit.

6). Equipped with precision adjustment menu, users can adjust error values by themselves.

7). User-friendly interface, friendly software interface, complete functions, easily complete calibration work, with current and temperature waveform recording and analysis functions, and can store current and temperature waveforms, making it more intuitive to analyze the relationship between current and temperature. Make all data and test analysis results clear at a glance.

8). Can display three-phase full current curves, up to 120 temperature (according to customer selection) curves. Can be equipped with a micro printer, can print curve charts and test data at any time on site.

9). Can customize test modules according to user requirements, software free upgrade for life

　

High-precision fully automatic three-phase high-current generator. Main technical parameters:

Power input: AC 380/220V±10% 50Hz.

◆ Output 0～2000A current.

Current accuracy: 0.2 class.

◆ Output voltage: 6V.

◆ Each current can be smoothly and continuously adjusted, accuracy 0.2 class; output current is standard sine wave, with minimal burrs, better than the standard required by the power system, ripple coefficient less than 3%. The phase angle between each phase is 120 degrees.

Current waveform distortion THD 1% design standard is far higher than the national standard "GB14048.2-14".

Protection settings: overcurrent, overvoltage

◆ Temperature: 0-300℃ accuracy 0.1℃

Timing setting range: 0.001S—9999999.999S, accuracy: 0.001S.