Three-Phase Capacitance and Inductance Tester Manufacturer Product Overview:
Power quality issues are mainly caused by the terminal load side. Among them, impact reactive loads can cause severe voltage fluctuations in the power grid, reduce power supply quality, and result in low power factor operation of the grid. With the development of power electronics technology, it not only brings energy saving and positive aspects of energy conversion to modern industry, but the widespread application of power electronic devices in various industries has also brought new and more serious damage to power quality, becoming the main source of harmonic pollution in the power grid. Power departments are paying more and more attention to power quality issues, and reactive power compensation complete sets of devices have been widely put into distribution network operation. Among them, power capacitors are important equipment for the stable operation of the power system. Reactive power compensation devices should meet the requirements of automatic tracking and real-time compensation, which inevitably requires frequent switching of compensation capacitor banks. This will produce overcurrent and overvoltage impacts. After long-term operation, it may cause insufficient capacitance or even damage to the capacitors, affecting the stable operation of the power grid. In order to avoid this situation, detect capacitor defects early, ensure reliable operation of equipment, and avoid expansion of faults, it is necessary to regularly test capacitor banks. In the field, capacitors are connected in parallel in groups. The traditional method is to remove the capacitor busbar and then use a traditional capacitance meter for measurement. The workload of disconnecting wires to measure capacitance is very large, and frequent disconnection can cause screws to slip or not be tightened, leaving safety hazards and easily causing secondary damage to the capacitors.
In response to the actual situation on site, Yangzhou Tuopu Electrical Technology Co., Ltd. has timely developed the TPCLC-S+
Fully Automatic Three-Phase Capacitance and Inductance Tester using a new testing method. This instrument internally generates a three-phase AC test source digitally, and can directly measure the single-phase capacitance of parallel capacitor banks or three-phase capacitors of various connection types without disconnecting wires. It can also measure the inductance of various reactors. The wiring is simple, testing and recording are convenient, and work efficiency is improved. It uses a large-screen color LCD as the display window, menu operation with Chinese prompts, and a display interface that integrates multiple parameters on one screen. The human-machine dialogue interface is friendly, and it is easy and quick to use. It is a professional product for power users at all levels.
Functional Features
1. The instrument has a built-in battery and automatically digitally synthesizes a three-phase high-power test power supply, so it can be used without an external power supply.
2. The instrument can measure individual single-phase capacitors of parallel capacitor banks and simultaneously measure three-phase capacitors of various connection types without disconnecting wires.
3. This fully automatic three-phase capacitance and inductance tester can test three phases simultaneously or measure three parallel capacitors or reactors at the same time.
4. The instrument can measure the inductance of various reactors.
5. The instrument can measure the amplitude of power frequency current and the harmonic content of the 2nd to 32nd harmonics in the current.
6. The instrument can display data such as voltage, current, power, phase angle, and impedance measured during the process of measuring capacitors or reactors, so as to better analyze the problem.
7. The instrument has an overcurrent protection function for the test power supply: short circuit of the power output will not damage the instrument.
8. The instrument adopts an 800×480 large-screen high-brightness true color LCD, which can be clearly displayed even in sunlight.
9. Graphical menu, full Chinese operation prompts, friendly interface, and easy operation.
10. Conductive silicone rubber touch keys make operation easier and extend key life.
11. The instrument has a built-in large-capacity non-volatile memory: can store 200 sets of measurement data.
12. The instrument has a built-in high-precision real-time clock function: can calibrate date and time.
13. The instrument comes with a high-speed built-in micro thermal printer: users can print the test data results through the micro printer at any time.
Technical Specifications
1. Output voltage: 0～20V, automatic adjustment
2. Measurement range: Capacitance: 0.01uF～4000uF
Inductance: 1mH～20H
Resistance: 50mΩ～20kΩ
Current: 50mA～10A
Voltage: 0～20V
Capacitance range: 0～20,000 kvar
3. Measurement accuracy: Capacitance: ±(1%+2 digits)
Inductance: ±(1%+2 digits)
Current: ±(0.5%+2 digits)
Voltage: ±(0.5%+2 digits)
Capacitance: ±(1%+2 digits)
4. Resolution: Voltage: 0.1mV
Current: 0.1mA
Capacitance: 0.1nF
Inductance: 0.1mH
5. Charging power supply: AC 160V～260V
6. Working temperature: -15℃～+45℃
