SLQ1000A Intelligent Three-Phase High Current Generator

SLQ1000A Intelligent Three-Phase High Current Generator

Published: 2019-10-12 14:41:56

Category: High Current Generator

Product Description

Main Performance Indicators

1. Input Power: AC: 220V-25A, 50Hz

2. Output Current: AC: 1000A, 5V or 500A, 10V

3. Output Current Waveform Distortion: ≤5%

4. 4 1/2 LCD Digital Display, Range: 0~1000A, Resolution: 0.1A,

Accuracy: ±0.5%

5. Operating Environment: Temperature -10-40°C, Relative Humidity <80%

6. Volume: 402X232X245mm³

7. Weight: 30Kg

2. Product Functions

1. High Current Output Terminal

2. Power Indicator Light

3. Power Input Terminal: AC: 220V power input here.

4. Ground Terminal: For safety, this terminal should be grounded.

5. 4 1/2 LCD Digital Display Ammeter.

6. Current Output Button: Press this button to output high current, and the output indicator light turns on.

7. Current Cut-off Button: Press this button to cut off high current, and the output indicator light turns off.

8. High Current Adjustment Knob.

9. Ammeter Calibration Adjustment Hole: Used when the meter needs to be calibrated. During calibration, lift the circular seal of the hole, and use a small flat-head screwdriver or a watchmaker's screwdriver to adjust. After adjustment, restore the circular seal.

3. Working Principle

The circuit is shown in the figure. AC: 220V power is input from X₁-X₂, adjusted by the TY voltage regulator, controlled by K1, and the T current booster increases the current, outputting high current through the ammeter A from X₁~X₂. When the two sets of coils are connected in parallel, it can output 1000A current with a maximum no-load voltage of 5V; when the two sets of coils are connected in series, it can output 500A current with a maximum no-load voltage of 10V.

4. Product Precautions

1. The cross-section of the input power cable of this tester should be greater than 2mm², and the cross-section of the high current output connecting cable should be greater than 100mm², and the length of the output connecting cable should be shortened as much as possible.

2. As long as the output current requirement can be met, try to use parallel output.

3. Avoid continuous output for a long time.

4. For safety, the grounding terminal should be reliably grounded.

5. Product Operating Environment:

1. Working Power: 220V or 380V ±10% 50HZ

2. Ambient Temperature: -10°C to 40°C

3. The surrounding area should be free of gases, vapors, chemical dust, dirt, and other explosive media that seriously affect transformer insulation.

Main Technical Parameters:

Model	Rated Capacity (KVA)		Rated Output
Model	Current (A)	Voltage (V)	Frequency (Hz)
SLQ-500A	3	500	10	50
SLQ-1000A	5	1000	5	50

← Previous
Long Time High Current Generator Next →
Temperature Rise High Current Test Equipment

Product Details

SLQ1000A Intelligent Three-Phase High Current Generator