Desktop|中文
Home About Us Products + News Center Technical Articles Messages Contact Us

Product Details

全自动Dielectric Loss Tester-扬州达瑞

GYSB Series AC Series-Excited Test Transformer - Yangzhou Darui

Published: 2020-08-27 08:24:56

Views: 2922

Category: Power Frequency Withstand Voltage Device

Product Description
GYSB Series AC Series-Excited Test Transformer 

Darui Electric recommends for you:

 



  I. AC Series-Excited Test Transformer Product Overview 

 
AC Series-Excited Test Transformer is a new type of high-voltage testing equipment. This series of products adopts a single-frame core-type iron core structure, with the primary winding and high-voltage winding coaxially wound on the iron core, thereby reducing leakage flux and increasing coupling between windings. The overall structure of the product is compact, with strong versatility, and is easy to use and carry. It is suitable for power systems and power users to test the insulation performance of various high-voltage electrical equipment on site, and is an essential test instrument for power equipment testing and preventive tests. 

   

  AC Series-Excited Test Transformer can not only be used for AC power frequency withstand voltage tests, but if equipped with capacitors, silicon stacks, and high-voltage DC microammeters of the same voltage level and capacity, it can be assembled into a DC high-voltage test device to measure high-voltage DC leakage current. 

    GYSB Series AC Series-Excited Test Transformer



  II. AC Series-Excited Test Transformer Operating Steps 

  1. Connect the leads according to the wiring schematic diagram, and reliably ground the transformer and control box; 

  2. Before testing, check whether the connections at each part are in good contact, and check whether the voltage regulator of the control box is adjusted to the "zero" position; 

  3. Connect the power supply, the green indicator light turns on, press the start button, the red indicator light turns on, indicating that the transformer is energized and waiting for voltage boosting; 

  4. Rotate the voltage regulator handle clockwise at a uniform speed to boost the voltage, and closely monitor the instrument indications and the condition of the test object; 

  5. After the test is completed, quickly reduce the voltage to zero and press the stop




Note: The above information and technical parameters are compiled and released by Yangzhou Darui Electric Co., Ltd.




 
WeChat QR Code
💬
💬 Message ✕

Hello! Have you found what you need? Contact us directly online!

Leave a Message for Consultation
Yangzhou Darui Electric Co., Ltd.
主营产品:Dielectric Loss Tester、Transformer Ratio测试仪、Loop Resistance Tester、高压None线核相仪、Insulation Resistance Tester、Partial Discharge Tester、Cable Fault Tester、DC Resistance Tester等。
☎ Phone: 18952707000(关经理)📞 Landline: 0514-88770377✉ Email: 195214804@qq.com
Verification Code
By submitting, you agree to ourTerms of ServiceandPrivacy Policy
🏠 网站Home📞 一键拨号✉ Contact Us